You will need

Crochet Hook: Size G6 / 4mm
Yarn: any Worsted Weight 4 ply yarn is fine.
Colors: Off White and Black
Craft Eyes: 6mm Solid Black Plastic Craft Eyes with safety backing
Craft Felt : Black, 2 small patches
Needle and black thread: for sewing on felt patches
Yarn or Tapestry Needle: for sewing parts together
Pins: for holding parts together while you sew
Poly-fil: polyester fiberfill for stuffing
Scissors

Abbreviations

SC = Single Crochet
ST= Stitch
INC = Increase
DEC = Decrease

Note

To change color of the yarn, begin the single crochet with the first color. This should leave you with two loops on your hook. Now grab the second color with the hook and pull it through both loops to complete the stitch. Now continue the next single crochet in the second color.

Muzzle

Off White yarn. Start with Chain 2.
R1: 5 SC in second chain from hook (5)
R2: SC 3, INC 2 (7)
R3: INC 1, SC 3, INC 3 (11)
R4: SC 2 (2) Yes, that’s right, this row only has 2 stitches and should finish off at the top of the muzzle. Fasten off leaving a 10 inch (25 cm) tail for sewing on to head.
Because the muzzle is so small, instead of stuffing with poly-fil, I use left over bits of off white yarn. Sew on nose and mouth with black yarn.

Head

Off White yarn. Start with Chain 2
R1: 6 SC in second chain from hook (6)
R2: INC 1 in each ST (12)
R3: * SC 1, INC 1 * repeat 6 times (18)
R4: * SC 2, INC 1 * repeat 6 times (24)
R5: * SC 2, INC 1 * repeat 8 times (32)
R6: SC in each ST (32)
R7: * SC 3, INC 1 * repeat 8 times (40)
R8: SC in each ST (40)
R9: as above (40)
R10: as above (40)
R11: as above (40)
R12: * SC 3, DEC 1 * repeat 8 times (32)
R13: SC in each ST (32)
R14: * SC 2, DEC 1 * repeat 8 times (24)
Insert eyes through the patches of felt by cutting a tiny slit in the felt. Place into position on the head and sew patches onto the head. Fasten on the safety backings.
R15: * SC 1, DEC 1 * repeat 8 times (16)
R16: * SC 2, DEC 1 * repeat 4 times (12)
R17: SC in each ST (12) Fasten off and stuff with poly:fil.

Ears (make 2)

Black yarn. Start with chain 2
R1: 6 SC in second chain from hook (6)
R2: INC 1 in each ST (12)
R3: SC in each ST (12)
R4: as above (12) Fasten off, leave a 6 inch (15 cm) tail for sewing onto head, flatten the ears so that they are in the shape of a half circle and two layers thick, no need to stuff with poly-fil.

Body

Off White yarn. Start with Chain 2.
R1: 5 SC in second chain from hook (5)
R2: INC 1 in each ST (10)
R3: * SC 1, INC 1 * repeat 5 times (15)
R4: INC 1 in each ST (30)
R5: SC in each ST (30)
R6: as above (30)
R7: as above (30)
R8: as above (30)
R9: * SC 4, DEC 1 * repeat 5 times (25)
Change to black yarn
R10: SC in each ST (25)
R11: as above (25)
R12: * SC 3, DEC 1 * repeat 5 times (20)
R13: SC in each ST (20)
R14: *SC 2, DEC 1 * repeat 5 times (15)
R15: SC in each ST (15)
R16: as above (15) Fasten off, leaving a 10 inch (25 cm) tail for sewing onto head, stuff with poly-fil.

Arms (make 2)

Black yarn. Start with Chain 2.
R1: 6 SC in second chain from hook (6)
R2: INC 1 in each ST (12)
R3: SC in each ST (12)
R4: * SC 2, DEC 1 * repeat 3 times (9)
R5: SC in each SC (9)
R6 to R9: as above (9) Fasten off, leaving a 9 inch (20 cm) tail for sewing onto body, stuff with poly-fil.

Legs (make 2)

Black yarn. Start with Chain 2.
R1: 6 SC in second chain from hook
R2: INC 1 in each ST (12)
R3: SC in each ST (12)
R4: SC 3, DEC 1, SC 1, DE1, SC 4 (10)
R5: SC in each ST (10)
R6 to R8: as above (10) Fasten off, leaving a 9 inch (20 cm) tail for sewing onto body, stuff with poly-fil.

Tail

Black yarn. Start with Chain 2.
R1: 4 SC in second chain from hook. (4)
R2: INC 1 in each ST (8)
R3: SC in each ST (8) Fasten off leaving a 6 inch (15 cm ) tail for sewing onto the back of the body. No need to stuff with poly-fil.

Assembly

Pin the parts in place and sew together with a yarn needle.
You can decorate him by tying a bow around his neck.

More Amigurumi Panda Ideas

You will need

3.5mm crochet hook
8ply (DK/Light worsted) acrylic yarn ball in light brown and red
dark brown or black embroidery thread
toy stuffing
yarn needle
scissors
pearl head pins
stitch marker (optional)

Abbreviations

Rnd – round
sc – single crochet
st / sts – stitch / stitches
inc – increase (2 sc in one stitch)
dec – single crochet decrease (sc 2 together)
rep – repeat

Pattern notes

You’ll need to know how to make a magic ring/circle.
You will be crocheting in spirals.
Invisible decrease technique was used for this pattern – if you’re not familiar with this decrease, a regular single crochet decrease is perfectly fine to do.

BEAR PATTERN

Use Brown yarn.

1st Leg

Rnd 1: Work 6 sc in magic ring (6 sts)
Rnd 2: Inc in each st around (12 sts)
Rnd 3: Sc 1, inc; rep 6 times (18 sts)
Rnds 4 – 8: Sc around (18 sts)
Fasten off and leave a short tail for sewing.

2nd Leg and Body

Rnd 1: Work 6 sc in magic ring (6 sts)
Rnd 2: Inc in each st around (12 sts)
Rnd 3: Sc 1, inc; rep 6 times (18 sts)
Rnds 4 – 8: Sc around (18 sts)
Next, join both legs.
Rnd 9: Sc around 1st leg (18 sts). Sc around 2nd leg (18 sts) (36 sts).
Stuff the legs firmly and continue to stuff the body firmly as you go.
Rnd 10: Sc around (36 sts)
Rnd 11: Sc 5, inc; rep 6 times (42 sts)
Rnds 12 – 20: Sc around (42 sts)
Rnd 21: Sc 5, dec; rep 6 times (36 sts)
Rnd 22: Sc around (36 sts)
Rnd 23: Sc 4, dec; rep 6 times (30 sts)
Rnd 24: Sc around (30 sts)
Rnd 25: Sc 3, dec; rep 6 times (24 sts)
Rnd 26: Sc around (24 sts)
Rnd 27: Sc 2, dec; rep 6 times (18 sts)
Fasten off and leave a long tail for sewing.

Head

Rnd 1: Work 6 sc in magic ring (6 sts)
Rnd 2: Inc in each st around (12 sts)
Rnd 3: Sc 1, inc; rep 6 times (18 sts)
Rnd 4: Sc 2, inc; rep 6 times (24 sts)
Rnd 5: Sc 3, inc; rep 6 times (30 sts)
Rnd 6: Sc 4, inc; rep 6 times 36 sts)
Rnd 7: Sc around (36 sts)
Rnd 8: Sc 5, inc; rep 6 times (42 sts)
Rnds 9 – 16: Sc around (42 sts)
Rnd 17: Sc 5, dec; rep 6 times (36 sts)
Rnd 18: Sc 4, dec; rep 6 times (30 sts)
Rnd 19: Sc 3, dec; rep 6 times (24 sts)
Rnd 20: Sc 2, dec; rep 6 times (18 sts)
Fasten off. Weave in and hide yarn tail. Stuff the head firmly.

Muzzle

Rnd 1: Work 6 sc in magic ring (6 sts)
Rnd 2: Inc in each st around (12 sts)
Rnd 3: Sc 1, inc; rep 6 times (18 sts)
Rnd 4: Sc around (18 sts)
Fasten off and leave a long tail for sewing.

Ear (Make 2)

Rnd 1: Work 6 sc in magic ring (6 sts)
Rnd 2: Inc in each st around (12 sts)
Rnds 3 – 4: Sc around (12 sts)
Rnd 5: Sc 1, dec; rep 4 times (8 sts)
Fasten off and leave a long tail for sewing.

Arm (Make 2)

Rnd 1: Work 7 sc in magic ring (7 sts)
Rnd 2: Inc in each st around (14 sts)
Rnds 3 – 7: Sc around (14 sts)
Stuff the arms and continue to stuff as you go – only stuffing the top of the arms very lightly.
Rnd 8: Sc 5, dec; rep 2 times (12 sts)
Rnd 9: Sc around (12 sts)
Rnd 10: Sc 4, dec; rep 2 times (10 sts)
Rnd 11: Sc around (10 sts)
Rnd 12: Sc 3, dec; rep 2 times (8 sts)
Rnd 13 Sc around (8 sts)
Flatten the opening of the arm then single crochet over the opening (crochet the two edges together) to close. Fasten off and leave a long tail for sewing.

Tail

Rnd 1: Work 5 sc in magic ring (5 sts)
Rnd 2: Inc in each st around (10 sts)
Rnd 3: Sc around (10 sts)
Fasten off and leave a long tail for sewing.

HEART PATTERN

Use Red yarn.

1ST Bump

Rnd 1: Work 6 sc in magic ring (6 sts)
Rnd 2: Inc in each st around (12 sts)
Rnd 3: Sc around (12 sts)
Fasten off and leave a tail for sewing.

2ND Bump

Rnd 1: Work 6 sc in magic ring (6 sts)
Rnd 2: Inc in each st around (12 sts)
Rnd 3: Sc around (12 sts)
Next, join both bumps.
Rnd 4: Sc around 1st bump (12 sts). Sc around 2nd bump (12 sts) (24 sts)
Rnd 5: Sc 2, dec; rep 6 times (18 sts)
Rnd 6: Sc around (18 sts)
Stuff the heart firmly and continue stuffing the heart until closed.
Rnd 7: Sc 1, dec; rep 6 times (12 sts)
Rnd 8: Sc around (12 sts)
Rnd 9: Dec 6 times (6 sts)
Rnd 10: Sc around (6 sts)
Fasten off and leave a long tail. Weave the tail through all 6 stitches (front loops only), then gently pull the tail to close the heart. Weave in and hide the tail through the piece several times.
Use the yarn tail from the 1st bump to sew the small opening between the bumps to close.

1. To make round 4, join the 2nd bump to the 1st bump with a single crochet. Continue to single crochet all around the 1st bump (12 sts). Join the 1st bump to the 2nd bump with a single crochet. Continue to single crochet all around the 2nd bump (12 sts). Round 4 should have a total of 24 stitches.
2. At the end of Round 10, weave the tail through the front loops of each stitch then pull the tail end carefully to close the heart.
3. Sew the small gap between the 2 bumps to close, using the yarn tail from the 1st bump. Hide all yarn tails through the piece several times.

Assembly

1. Sew the muzzle on the head over Rounds 12 and 18. Lightly stuff the muzzle before closing. Weave in and hide yarn tail.
2. Embroider the nose onto the muzzle using dark brown or black embroidery thread. Use pins to plan where you want to embroider the nose. In this bear, I embroidered the nose between Rounds 2 and 3, about 2 stitches wide. Ensure that your embroidery thread is long enough to stitch the nose and eyes. Insert the needle under the head and come out through one of the stitch holes between Rounds 2 and 3 (or whichever spot you prefer), leave a short tail at the opening. Make several horizontal stitches about 2 stitches wide, keeping an even tension. Always insert the needle and come out of the same two stitch holes. Keep making horizontal stitches until you are happy with the size. Use the same thread for the eyes.
3. Embroider the eyes on Round 12, with an interspace of 1 stitch from the muzzle. Mark the eyes with pins before embroidering. Make several vertical stitches, 1 stitch tall for each eye, keeping an even tension. Always insert the needle and come out of the same two stitch holes. Keep making several vertical stitches until you are happy with the size. Bring the needle back out of the opening and knot off both tails securely.
4. Sew the ears on each side of the head over Rounds 6 and 8. Weave in and hide yarn tails.
5. Use the yarn tail from the 1st leg to sew the gap close between the legs.
6. Matching stitch for stitch, sew the head onto the neck of the body. Add more stuffing before closing. Don’t worry if the head has been sewn on slightly off centre – this can give your bear a bit of character!
7. Position the arms on each side of the bear’s body on a slight downwards angle. Sew the arms to the body over Rounds 23 and 25.
8. Sew the tail on the back of the body over Rounds 12 and 14. Weave in and hide yarn tail.
9. Pin the heart on the bear, then using red or light brown yarn, sew each arm onto the heart. Weave in all yarn tails and ensure all pins have been removed.

More Amigurumi Bear Ideas

You will need

1 skein Lion Brand Heartland (Mount Rainier shown) or approx 165 yds worsted weight (4) yarn
Approx 3 yds worsted weight (4) black yarn
1 sheet white felt
1 sheet colored felt (optional)
2 buttons (1/2 – 3/4″)
Polyfil stuffing
Shank back eyes (12 mm)
Blush (optional)
4 mm crochet hook
Stitch Marker
Large & small darning needle
Scissors
Hot glue gun

Abbreviations

Ch – Chain
Sc – Single Crochet
Sc2tog – Single Crochet Two Together **see stitch description
Slst – Slip Stitch
Sts – Stitches

Head

Round 1: Make a magic ring with 6 sc. Do not join, continue to work in spiral.
Round 2: Make 2 sc in every stitch. (12 sts)
Round 3: Sc once into the first stitch and 2 sc into the next stitch. *Sc into the next stitch, 2 sc into the next. Repeat from * around. (18 sts)
Round 4: Sc once into the first 2 stitches and 2 sc into the next stitch. *Sc into the next 2 stitches, 2 sc into the next. Repeat from * around. (24 sts)
Round 5: Sc once into the first 3 stitches and 2 sc into the next stitch. *Sc into the next 3 stitches, 2 sc into the next. Repeat from * around. (30 sts)
Round 6: Sc once into the first 4 stitches and 2 sc into the next stitch. *Sc into the next 4 stitches, 2 sc into the next. Repeat from * around. (36 sts)
Rounds 7-10: Sc once into every stitch. (36 sts)
Round 11: Sc once into the first 5 stitches and 2 sc into the next stitch. *Sc into the next 5 stitches, 2 sc into the next. Repeat from * around. (42 sts)
Round 12: Sc once into the first 6 stitches and 2 sc into the next stitch. *Sc into the next 6 stitches, 2 sc into the next. Repeat from * around. (48 sts)
Rounds 13-19: Sc once into every stitch. (48 sts)
Round 20: Sc once into the first 6 stitches and scdec over the next 2 stitches. *Sc into the next 6 stitches, scdec over the next 2. Repeat from * around. (42 sts)
Round 21: Sc once into the first 5 stitches and scdec over the next 2 stitches. *Sc into the next 5 stitches, scdec over the next 2. Repeat from * around. (36 sts)
Round 22: Sc once into the first 4 stitches and scdec over the next 2 stitches. *Sc into the next 4 stitches, scdec over the next 2. Repeat from * around. (30 sts)
Round 23: Sc once into the first 3 stitches and scdec over the next 2 stitches. *Sc into the next 3 stitches, scdec over the next 2. Repeat from * around. (24 sts)
Round 24: Sc once into the first 2 stitches and scdec over the next 2 stitches. *Sc into the next 2 stitches, scdec over the next 2. Repeat from * around. (18 sts)
Bind off leaving a tail that is approximately 12″ in length.
Cut two circles from a piece of white felt slightly larger than the eyes. Make a slit in the middle of each circle for the shank back to fit through. Place the eyes in between rounds 10 and 11 approximately 4 stitches apart.

Snout

Round 1: Ch 5. Sc in the 2nd chain from hook. Sc in the next 2 chains. Sc 5 into last chain. Rotate your work and Sc in the next 2 stitches. Sc 3 into the last stitch. Do not join, continue to work in spiral. (13 sts)
Round 2: Sc 2 in the first stitch. Sc in the next 3 stitches. Sc 2 in the next stitch. Sc in the next stitch. Sc 2 in the next stitch. Sc into the next 4 stitches. Sc 2 in the next stitch. Sc in the next stitch. (17 sts)
Round 3: Sc 2 into the first stitch. Sc in the next 5 stitches. Sc 2 in the next stitch. Sc in the next 2 stitches. Sc 2 in the next stitch. Sc into the next 5 stitches. Sc 2 in the next stitch. Sc into the last stitch. (21 sts)
Round 4: Sc in the first stitch. Sc 2 in the next stitch. Sc into the next 6 stitches. Sc 2 in the next stitch. Sc into the next 2 stitches. Sc 2 into the next stitch. Sc in the next 7 stitches. Sc 2 in the next stitch. Sc into the last stitch. (25 sts)
Round 5: Sc into every stitch. (25 sts)
Round 6: Sc into the first 23 stitches, slst into the last 2 stitches. (25 sts)
Bind off leaving a tail that is approximately 12″ in length.Using your black yarn applique the nose.

Ears (make 2)

Round 1: Make a magic ring with 6 sc. Do not join, continue to work in spiral.
Round 2: Make 2 sc in every stitch. (12 sts)
Rounds 3-5: Sc once into every stitch. (12 sts)
Bind off leaving a tail that is approximately 8″ in length.
Cut two half circles from a piece of colored felt slightly smaller than the ears. Using a hot glue gun attach the half circles to each ear.

Body

Round 1: Make a magic ring with 6 sc. Do not join, continue to work in spiral.
Round 2: Make 2 sc in every stitch. (12 sts)
Round 3: Sc once into the first stitch and 2 sc into the next stitch. *Sc into the next stitch, 2 sc into the next. Repeat from * around. (18 sts)
Round 4: Sc once into the first 2 stitches and 2 sc into the next stitch. *Sc into the next 2 stitches, 2 sc into the next. Repeat from * around. (24 sts)
Round 5: Sc once into the first 3 stitches and 2 sc into the next stitch. *Sc into the next 3 stitches, 2 sc into the next. Repeat from * around. (30 sts)
Round 6: Sc once into the first 4 stitches and 2 sc into the next stitch. *Sc into the next 4 stitches, 2 sc into the next. Repeat from * around. (36 sts)
Round 7: Sc once into the first 5 stitches and 2 sc into the next stitch. *Sc into the next 5 stitches, 2 sc into the next. Repeat from * around. (42 sts)
Rounds 8-19: Sc once into every stitch. (42 sts)
Round 20: Sc once into the first 5 stitches and scdec over the next 2 stitches. *Sc into the next 5 stitches, scdec over the next 2. Repeat from * around. (36 sts)
Round 21: Sc once into every stitch. (36 sts)
Round 22: Sc once into the first 4 stitches and scdec over the next 2 stitches. *Sc into the next 4 stitches, scdec over the next 2. Repeat from * around. (30 sts)
Round 23: Sc once into every stitch. (30 sts)
Round 24: Sc once into the first 3 stitches and scdec over the next 2 stitches. *Sc into the next 3 stitches, scdec over the next 2. Repeat from * around. (24 sts)
Rounds 25-26: Sc once into every stitch. (24 sts)
Round 27: Sc once into the first 2 stitches and scdec over the next 2 stitches. *Sc into the next 2 stitches, scdec over the next 2. Repeat from * around. (18 sts)
Rounds 28-29: Sc once into every stitch. (18 sts)
Bind off leaving a tail that is approximately 12″ in length.

Limbs (make 4)

Round 1: Make a magic ring with 6 sc. Do not join, continue to work in spiral.
Round 2: Make 2 sc in every stitch. (12 sts)
Round 3: Sc once into the first stitch and 2 sc into the next stitch. *Sc into the next stitch, 2 sc into the next. Repeat from * around. (18 sts)
Rounds 4-8: Sc once into every stitch. (18 stitches)
Round 9: Sc once into the first stitch and scdec over the next 2 stitches. *Sc into the next 2 stitches, scdec over the next 2. Repeat from * around. (12 sts)
Rounds 10-23: Sc once into every stitch. (12 sts)
Bind off leaving a tail that is approximately 12″ in length.

Tail

Round 1: Make a magic ring with 6 sc. Do not join, continue to work in spiral.
Round 2: Make 2 sc in every stitch. (12 sts)
Rounds 3-4: Sc once into every stitch. (12 sts)
Bind off leaving a tail that is approximately 8″ in length.

Assembly

To begin the assembly of your bear, start by filling the bottom of the body and each limb with weighted craft beads or dry, uncooked rice works in a pinch. The extra weight helps the bear to sit up properly and to allow the legs to move from the standing and seated position easier.

Stuff each component of your bear and begin sewing each arm to the body first. Sew the tops of the legs closed and add a button to each leg at the top. Using a large darning needle and some scrap yarn, run the darning needle through one leg, into the body and out the other side, and finally into the other leg. Run the needle back through in the opposite direction. Tighten and tie a knot to hold the legs firmly in place. Weave in your ends.

Sew the ears in place. Sew the head to the body. Weave in all your ends.

Take two scrap pieces of yarn and with a large darning needle, feed the scrap from the back of the head out right next to the eye. Run the yarn back through to the back side. Pull to draw in the eye a bit and tie a knot. Weave in your ends and repeat for the other eye.

Eyelids: Take two pieces of scrap yarn and ch 4. Bind off.
Scarf: If you would like to crochet the same scarf as you see in the pictures, you will need approximately 15 yards of light weight (3) yarn and a 4mm crochet hook. Chain 5 and Tunisian Simple stitch until your scarf is long enough to wrap around your bear.

More Amigurumi Bear Ideas

You will need

Super bulky weght (6) yarn (I used half a sken of the color “Polar”)
5.00 mm hook
20 mm plastic safety eyes
Fiberll stung
Yarn needle
Scissors

Abbreviations

MR: magic ring (a.k.a. magic circle, magic loop)
YO: yarn over
Sc: single crochet
Sl st: slip stitch (insert hook, yarn over, pull through both loops)
Dec: decrease (sc two stitches together)
Inc: increase (two sc in one stitch)

Head

R1: 6 sc in magic ring. (6 sts)
R2: Inc around. (12 sts)
R3: (Sc, inc) x 6. (18 sts)
R4: (Sc 2, inc) x 6. (24 sts)
R5: (Sc 3, inc) x 6. (30 sts)
R6: (Sc 4, inc) x 6. (36 sts)
R7-R9: Sc around. (36 sts)
R10: (Sc 5, inc) x 6. (42 sts)
R11: Sc around. (42 sts)
R12: (Sc 5, dec) x 6. (36 sts)
R13: (Sc 4, dec) x 6. (30 sts)
R14: (Sc 3, dec) x 6. (24 sts)
R15: (Sc 2, dec) x 6. (18 sts)
Fasten off and weave in the ends.

Ears (Make 2)

R1: 6 sc in magic ring. (6 sts)
R2: Inc around. (12 sts)
R3: Sc around. (12 sts)
Fasten off with a long tail for sewing to the head later.

Muzzle

R1: 6 sc in magic ring. (6 sts)
R2: Inc around. (12 sts)
Fasten off with a long tail for sewing to the head later.

Body

R1: 6 sc in magic ring. (6 sts)
R2: Inc around. (12 sts)
R3: (Sc, inc) x 6. (18 sts)
R4: (Sc 2, inc) x 6. (24 sts)
R5: (Sc 6, dec) x 3. (21 sts)
R6: Sc around. (21 sts)
R7: (Sc 5, dec) x 3. (18 sts)
R8: Sc around. (18 sts)
Fasten off with a long tail for sewing to the head later.

Arms (Make 2)

R1: 6 sc in magic ring. (6 sts)
R2-R6: Sc around. (6 sts)
Fasten off with a long tail for sewing to the body later.

Legs (Make 2)

R1: 6 sc in magic ring. (6 sts)
R2: Inc around. (12 sts)
R3: Sc around. (12 sts)
R4: Sc 2, dec 4, sc 2. (8 sts)
R5: Sc around. (8 sts)
Fasten off with a long tail for sewing to the body later.

Assembly

1. Gather all the crocheted pieces: head, ears (x2), muzzle, body, arms (x2), legs (x2).
2. You can position the parts together first, using sewing pins to hold them together. This will help you visualize how the
   bear looks as a whole.
3. Using a yarn needle and black yarn scraps, sew a triangle nose onto the bear’s muzzle. You can also sew a line for the
   mouth.
4. Using a yarn needle, sew the muzzle to the bear’s head. Then, sew the ears to the bear’s head.
5. Attach plastic safety eyes to the bear’s head. (I used 20mm eyes.)
6. Stuff the legs firmly, but be careful not to stretch the stitches.
7. Sew the arms and legs to the body.
8. Stuff the body and head firmly, but be careful not to stretch the stitches.
9. Sew the body to the head.

More Amigurumi Polar Bear Ideas

You will need

YarnArt Jeans yarn: beige , pink , bright pink , white, browN
2.00 mm crochet hook
8 mm half beads
Buttons for joining arms and legs (4 pcs)
Fabric glue
Sewing needle
Scissors
Fiberfill

Abbreviations

R = row
mc = magic circle
ch = chain
sc = single crochet
hdc = half double crochet
sl st = slip stitch
inc = 2 sc in the next stitch
dec = single crochet 2 stitches together
BLO = back loop only
F.o. = finish off
(…)*6 = repeat whatever is between the brackets the number of times stated
(12) = number of stitches you should have at the end of the round/row

Head

With beige yarn:
R 1: 6 sc in mc (6) R 2: inc6 (12) R 3: (1 sc, inc)6 (18)
R 4: 1 sc, inc, (2 sc, inc)5, 1 sc (24) R 5: (3 sc, inc)6 (30)
R 6: 2 sc, inc, (4 sc, inc)5, 2 sc (36) R 7: (5 sc, inc)6 (42)
R 8: 3 sc, inc, (6 sc, inc)5, 3 sc (48) R 9: (7 sc, inc)6 (54)
R 10-17: 54 sc (8 rows)
R 18: (7 sc, dec)6 (48) R 19: 3 sc, dec, (6 sc, dec)5, 3 sc (42)
R 20: (5 sc, dec)6 (36) R 21: 2 sc, dec, (4 sc, dec)5, 2 sc (30)
R 22: (3 sc, dec)6 (24) R 23: 1 sc, dec, (2 sc, dec)5, 1 sc (18)
R 24: (1 sc, dec)6 (12) Stuff with fiberfill. R 25: dec6 (6)
F.o.

Muzzle

With white yarn:
R 1: 6 sc in mc (6)
R 2: inc6 (12) R 3: (1 sc, inc)6 (18)
R 4: 18 sc
F.o. and leave a long tail for sewing.

Ears (Make 2)

With white yarn:
R 1: 6 sc in mc, 1 turning chain
R 2: inc*6 (12)
F.o. and leave a long tail for sewing.

Cheeks (Make 2)

With pink yarn:
Make a magic circle amigurumi.
1: 2 ch in mc, 10 hdc, join in a ring with sl st in 2nd ch.
F.o. and leave a long tail for sewing.

Body

With beige yarn:
R 1: 6 sc in mc (6)
R 2: inc6 (12) R 3: (1 sc, inc)6 (18)
R 4: 1 sc, inc, (2 sc, inc)5, 1 sc (24) R 5: (3 sc, inc)6 (30)
R 6: 2 sc, inc, (4 sc, inc)5, 2 sc (36) R 7: (5 sc, inc)6 (42)
R 8: 3 sc, inc, (6 sc, inc)5, 3 sc (48) R 9-16: 48 sc (8 rows) R 17: 12 sc, 12 dec, 12 sc (36) R 18-19: 36 sc (2 rows) R 20: 2 sc, dec, (4 sc, dec)5, 2 sc (30)
R 21-22: 30 sc (2 rows)
R 23: (3 sc, dec)*6 (24)
R 24-25: 24 sc (2 rows)
Stuff with fiberfill.
F.o. and leave a long tail for sewing.

Arms (Make 2)

With beige yarn:
R 1: 6 sc in mc (6)
R 2: inc6 (12) R 3-4: 12 sc (2 rows) R 5: dec, 10 sc (11) R 6: dec, 9 sc (10) R 7: dec, 8 sc (9) R 8-15: 9 sc (8 rows) Stuff with fiberfill. R 16: (1 sc, dec)3 (6)
F.o.

Legs (Make 2)

With pink yarn:
Make 6 ch.
Make an oval starting from the 2nd ch from hook, work on both sides of the chain.
R 1: From the 2nd ch from hook: 4 sc, 3 sc in last st, turn and crochet on the opposite side of the chain: 3 sc, inc (12)
R 2: inc, 3 sc, 3 inc, 3 sc, 2 inc (18)
R 3: 1 sc, inc, 3 sc, (1 sc, inc)3, 3 sc, (1 sc, inc)2 (24)
R 4: 2 sc, inc, 3 sc, (2 sc, inc)3, 3 sc, (2 sc, inc)2 (30)
Change to beige yarn:
R 5: BLO 30 sc
R 6-7: 30 sc (2 rows)
R 8: 4 sc, dec, (1 sc, dec)5, 9 sc (24) R 9: 24 sc R 10: 4 sc, dec, 1 sc, 4 dec, 1 sc, dec, 6 sc (18) R 11: (1 sc, dec)6 (12)
Stuff with fiberfill.
R 12-19: 12 sc (8 rows)
R 20: dec*6 (6)
Stuff leg ¾ full.
F.o.

Bow

With bright pink yarn:
Make 16 ch.
R 1: From the 2nd ch from hook: 15 sc, 1 turning chain
R 2: BLO, 15 sc, 1 turning chain
R 3: BLO, 15 sc, 1 turning chain
R 4: BLO, 15 sc, 1 turning chain
R 5: BLO, 15 sc
F.o.
Wrap the middle of the bow multiple times with brown yarn and sew to the body.

Assembly

1. Sew muzzle to the head between R 13 and R 29. Put some stuffing inside the muzzle before you finish.

2. Glue eyes between R 13 and R 14 at the distance of 6 stitches from each other.

3. Embroider eye whites with white yarn, embroider eyelids with beige yarn. Embroider nose and eyebrows with brown yarn.

4. Sew cheeks on the head between R 15 and R 19 of the head at the distance of 4 stitches from muzzle.

5. Fold the ear edges together and fix them in such position with one stitch. Sew ears to the head on R 8.

6. Sew head to the body. Stuff firmly the neck area. A firmly stuffed neck will hold the head up.

7. Attach arms and legs using buttons.Find position on your bears body where the legs/arms will be attached: for legs – between R 9 and 10 of the body, for arms – between R 21 and 22 of the body and between R 14 and 15 of arm
8. Embroider a head and a belly with brown yarn.

More Amigurumi Bow Tie Bear Ideas

You will need

• Yarn Detskaya Novinka Pekhorka 100% acrylic (50g/200m)
• 1.75 mm crochet hook
• 6 mm safety eyes 
• Yarn needle
• Fiberfill

Abbreviations

R – row
ch – chain
st – stitch
sc – single crochet
dc – double crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

[quads id=1]

Head

R 1. 6 sc in magic ring [6]
R 2. (inc) repeat 6 times [12]
R 3. (1 sc, inc) repeat 6 times [18]
R 4. (2 sc, inc) repeat 6 times [24]
R 5. (3 sc, inc) repeat 6 times [30]
R 6. (4 sc, inc) repeat 6 times [36]
R 7. (5 sc, inc) repeat 6 times [42]
R 8-14. 42 sc (7 rows)
R 15. (5 sc, dec) repeat 6 times [36]
R 16. (4 sc, dec) repeat 6 times [30]
R 17. (3 sc, dec) repeat 6 times [24]
R 18. (2 sc, dec) repeat 6 times [18]
Insert eyes between R 11 and R 12 at the distance of 3 stitches from each other.

Arms (make 2)

R 1. 6 sc in magic ring [6]
R 2. (inc) repeat 6 times [12]
R 3-16. 12 sc (14 rows)

Legs (make 2)

R 1. 8 sc in magic ring [8]
R 2. (inc) repeat 8 times [16]
R 3-12. 16 sc (10 rows)
Don’t cut the yarn on the second leg!

From second leg: 4 ch, join the first leg.
Continue crocheting in the round:
R 13. 16 sc on the first leg, sc in 4 ch, 16 sc on the second leg, sc in 4 ch (opposite side) [40]
R 14-21. 40 sc (8 rows)
R 22. (9 sc, dec) repeat 2 times, 7 sc, dec, 7 sc, dec [36]
R 23. 36 sc [36]
R 24. (4 sc, dec) repeat 6 times [30]
R 25-26. 30 sc (2 rows)
R 27. (3 sc, dec) repeat 6 times [24]
R 28-29. 24 sc (2 rows)
R 30. (2 sc, dec) repeat 6 times [18]
R 31. 18 sc [18]

[quads id=1]

Ears (make 2)

R 1. 6 sc in magic ring [6]
R 2. (inc) repeat 6 times [12]
R 3. (3 sc, inc) repeat 3 times [15]
R 4-5. 15 sc (2 rows)

Muzzle

R 1. 6 sc in magic ring [6]
R 2. (inc) repeat 6 times [12]
R 3. (1 sc, inc) repeat 6 times [18]
R 4-5. 18 sc (2 rows)

Bow

With pink yarn
Make 6 ch
From the 2nd ch from hook: 5 dc, 1 ch, turn, on the opposite side: 5 dc, 1 turning chain.
Continue crocheting 10 cm long: 5 dc, 1 turning chain.
Fold tops of bow flat and sc through both sides across.

More Amigurumi Bear Ideas

You will need

Rope;
1 Mustard Yellow color rope
1 Pomegranate Flower color rope
2.5 mm crochet
12 mm amigurumi eye
12 mm amigurumi nose
Fiber

Abbreviations

Sc = Single crochet
Inc = Increase
Dec = Decrease

Body

It starts with yellow color rope.
1) Magic ring 6SC
2) 6INC (12)
3) (1SC, 1INC) * 6 (18)
4) (2SC, 1INC) * 6 (24)
5) (3SC, 1INC) * 6 (30)
6) (4SC, 1INC) * 6 (36)
7-10) 36SC
Pomegranate flower is continued with color rope.
11-12) 36SC
13) (4SC, 1DEC) * 6 (30)
14) 30SC
15) (3SC, 1DEC) * 6 (24)
16) 24SC
17) (2SC, 1DEC) * 6 (18)
18) (1SC, 1DEC) * 6 (12)

Feet (2 pieces)

It starts with yellow color rope.
1) Magic ring 6SC
2) 6INC (12)
3) (1SC, 1INC) * 6 (18)
4-5) 18SC
6) 15SC, 3DEC
7) 12SC, 3DEC
8-12) 12SC

Hands and Arms (2 pieces)

It starts with yellow color rope.
1) Magic ring 5SC
2) 5INC (10)
3) (1SC, 1INC) * 5 (15)
4) 14SC
5) 15SC
6) (1SC, 1DEC) * 5 (10)
7-9) 10SC
Pomegranate flower is continued with color rope.
10-14) 10SC
15) 5DEC (5)

Head

It starts with yellow color rope.
1) Magic ring 6SC
2) 6INC (12)
3) (1SC, 1INC) * 6 (18)
4) (2SC, 1INC) * 6 (24)
5) (3SC, 1INC) * 6 (30)
6-10) 30SC
Amigurumi eyes 8-9. we install it between the rows with 5SC intervals.
11) 3INC, 6SC, 3INC, 18SC (36)
12) (1SC, 1INC) * 3, 6SC, (1SC, 1INC) * 3, 18SC (42)
13-15) 42SC
16) 12DEC, 18SC (30)
17) (3SC, 1DEC) * 6 (24)
18) (2SC, 1DEC) * 6 (18)
19) (1SC, 1DEC) * 6 (12)

Nose

It starts with yellow color rope.
1) Magic ring 6SC
2) 3INC, 3SC (9)
3) 3INC, 6SC (12)
We wear the amigurumi nose in the middle of the nose we duck. If you can not find amigurumi nose, you can also make a nose by processing it with brown rope.

Ears (2 pieces)

It starts with yellow color rope.
1) Magic ring 5SC
2) 5INC (10)
3-4) 10SC
5) 5DEC (5)

More Amigurumi Winnie the Pooh Ideas:

Abbreviations

Sc = Single crochet
Inc = Increase
Dec = Decrease

Legs

1. 8SC = 8 into mdecgic ring
2. Double in edecch hole 16SC = 16
3. row 1SC, INC = 24
4. row 2SC, INC = 32
5. row 3SC, INC = 40
6. row 4SC, INC = 48
7. row 48SC
8. row 48SC
9. row 48SC
10. row 48SC
11. row 48SC
12. row 8SC, (1SC, DEC,) (1SC, DEC), (1SC, DEC), (1SC, DEC,) (1SC, DEC), (1SC, DEC), (1SC, DEC), (1SC, DEC) 16SC = 40
13. row 7SC, (1SC, DEC,) (1SC, DEC), (1SC, DEC), (1SC, DEC,) (1SC, DEC), (1SC, DEC), 15SC = 34SC
14. row 6SC, (1SC, DEC,) (1SC, DEC), (1SC, DEC), (1SC, DEC,) (1SC, DEC), 13SC = 29SC
15. row 29SC
16. row 29SC
17. row 4SC, INC, 5SC, INC, SC, INC, 5SC, INC, 9SC = 32SC
18. row 32SC
19. row (7SC, INC), (7SC, INC), (7SC, INC), (7SC, INC) = 36SC
20. row 36SC
21. row 36SC
22. row 36SC
23. row 16SC, INC, 17SC, INC, SC = 38SC
24. row 38SC
25. row 38SC
26. row 38SC
    Leg making is finished. Knit the other leg in the same way.

Body

      The foot part of the teddy bear recipe is over now we are going to make the body.

1. combine the two legs together. Knit a total of 76SC.
2. row (9SC, INC, 8SC, INC), (9SC, INC, 8SC, INC), (9SC, INC, 8SC, INC), (9SC, INC, 8SC, INC) = 84SC
3. row (10SC, INC, 8SC, INC), (10SC, INC, 8SC, INC), (10SC, INC, 8SC, INC), (10SC, INC, 8SC, INC) = 94SC
4. row 94SC
5. row 94SC
6. row 94SC
7. row 94SC
8. row 94SC
9. row 94SC
10. row 94
11. row 94SC
12. row (44SC, DEC), (44SC, DEC) = 90SC
13. row 90SC
14. row 90SC
15. row 90SC
16. row 90SC
17. row (13SC, DEC), (13SC, DEC), (13SC, DEC), (13SC, DEC), (13SC, DEC), (13SC, DEC) = 84SC
18. row 84SC
19. row 84SC
20. row 84SC
21. row 84SC
22. row 84SC
23. row 84SC
24. row (12SC, DEC), (12SC, DEC), (12SC, DEC), (12SC, DEC), (12SC, DEC), (12SC, DEC) = 78SC
25. row 78SC
26. row 78SC
27. row (11SC, DEC), (11SC, DEC), (11SC, DEC), (11SC, DEC), (11SC, DEC), (11SC, DEC) = 72SC
28. row 72SC
29. row 72SC
30. row (10SC, DEC), (10SC, DEC), (10SC, DEC), (10SC, DEC), (10SC, DEC), (10SC, DEC) = 66SC
31. row 66SC
32. row 66SC
33. row (9SC, DEC), (9SC, DEC), (9SC, DEC), (9SC, DEC), (9SC, DEC), (9SC, DEC) = 60SC
34. row 60SC
35. row 60SC
36. row (8SC, DEC), (8SC, DEC), (8SC, DEC), (8SC, DEC), (8SC, DEC), (8SC, DEC) = 54SC
37. row 54SC
38. row 54SC
39. row (7SC, DEC), (7SC, DEC), (7SC, DEC), (7SC, DEC), (7SC, DEC), (7SC, DEC) = 48SC
40. row 48SC
41. row 48SC
42. row (6SC, DEC), (6SC, DEC), (6SC, DEC), (6SC, DEC), (6SC, DEC), (6SC, DEC) = 42SC
43. row 42SC
44. row 42SC
45. row (5SC, DEC), (5SC, DEC), (5SC, DEC), (5SC, DEC), (5SC, DEC), (5SC, DEC) = 36SC
46. row 36SC
47. row 36SC
48. row (4SC, DEC), (4SC, DEC), (4SC, DEC), (4SC, DEC), (4SC, DEC), (4SC, DEC) = 30SC

Head

We continue with the teddy bear recipe.

1. row into the magic ring 6SC
2. row 2 frequent needles in each hole = 12SC
3. row 1SC, INC = 18SC
4. row 2SC, INC = 24SC
5. row 3SC, INC = 30SC
6. row 4SC, INC = 36SC
7. row 5SC, INC = 42SC
8. row 6SC, INC = 48SC
9. row 7SC, INC = 54SC
10. row 8SC, INC = 60SC
11. row 9SC, INC = 66SC
12. row 10SC, INC = 72SC
13. row 11SC, INC = 78SC
14. row 12SC, INC = 84SC
15. Knit 15 rows of 84SC between rows and 34th rows.

35th row 12SC, DEC = 78SC
36th row 11SC, DEC = 72SC
37th row 10SC, DEC = 66SC
38th row 9SC, DEC = 60SC
39th row 8SC, DEC = 54SC
40th row 7sc, DEC = 48SC
41st row 6SC, DEC = 42SC
42nd row 5SC, DEC = 36SC
43rd row 4SC, DEC = 30SC
The eyes will be placed on the 22nd row. Knit with 15 frequent needles between the two eyes.
Sew the nose under one or two rows.

Nose

We go to the nose of our teddy bear recipe.

1. knit 6SC into the magic ring row
2. put 2 needles into each hole = 12SC
3. row 3SC, INC = 18SC
4. row 4SC, INC = 24SC
5. row 5SC, INC = 30SC
6. row 6SC, INC = 36SC
7. row 7SC, INC = 42SC
8. row 42SC

Arm

In the recipe of the bearer, it came to arms

1. knit 6SC into the magic ring row
2. put 2 needles into each hole = 12SC
3. row 1SC, INC = 18SC
4. row 2SC, INC = 24SC
5. row 3SC, INC = 30SC
6. row 9SC, INC = 33SC
7. row 33SC
8. row 33SC
9. row 33SC
10. row 33SC
11. row 9SC, DEC = 30SC
12. row 30SC
13. row 13SC, DEC = 28SC
14. row 28SC
15. row 12SC, DEC = 26SC
16. row 26SC
17. row 11SC, DEC = 24SC
18. row 24SC
19. row 10SC, DEC = 22SC
20. row 22SC
21. row 9SC, DEC = 20SC
22. Knit 8 rows of 20SC between rows and 34th rows.
    35th row 8SC, DEC = 18
    36th row 18SC
    37th row 7SC, DEC = 16SC

Ear

1.knit 6SC into the magic ring row
2.row 2 times each hole 12SC
3.row 1SC, INC = 18SC
4.row 2SC,INC = 24
5.row 3SC, INC = 30SC
6.row 4SC, INC = 36SC
7.Knit 5 rows 36SC between the 11th row and 6th row.

More Amigurumi Plush Bear Ideas:

You will need:

• Amigurumi Rope
• 5.00 – 5.50 mm Crochet
• 6 mm Safety Locked Eyes
• Black Embroidery thread for details and Tone fine thread to Main color
• 2 Buttons for Pajamas
• Sewing needle and scissors
• Fiber filler

Abbreviations

Sc = Single crochet
Inc = Increase
Dec = Decrease
SH = Magic Ring
Ch = Chain
Dc = Double Crochet
[…] * X = Repeat the contents of the brackets by the number of x
(…) = Total number of stitches in the specified sequence

Arm (2 pieces)

01 Making 2CH and taking the second ring of the chain with crochet: 8Sc in the same ring (8)
02 – 03 8Sc (2 Rows Same) (8)
We change the thread and continue with the Pink Color Thread (the same color as the Pajamas).
04 – 08 8Sc (5 Rows The Same) (8)
09 [2Sc, 1dec] * 2 (6)
We fill it with fiber and finish it.

Legs,Body and Head (One Pieces)

Legs (2 Pieces)

01 Making 2CH and taking it from the 2nd ring of the chain: 5SC in the same ring (5)
02 [1ınc] * 5 (10)
03 10SC (10)
We Change the Rope and continue to knit with the Pink Color Thread (same as the color of the pajama).
04 – 05 10SC (2 Rows Same) (10)
We cut the rope when the First Leg is over. We do not cut the rope when the Second Leg is over. We will continue knitting the trunk from here.

Body

06 After the Second Leg, we make 2CH and combine with the First Leg. 10SC On The First Leg, 1SC On Each 2 Chain Ring, 10SC On The Second Leg, 1SC On The Other Side Of The 2 Chain Rings (24)
We continue to knit the body in the form of circles. You can use markers to avoid confusion.
07 [5SC, 1inc] * 4 (28)
08 – 12 28SC (5 Rows Same) (28)
13 [5SC, 1dec] * 4 (24)
14 24SC (24)
15 [2SC, 1dec] * 6 (18)
16 We will add the arms: 4SC, 3SC with the loops of the First Arm, 6SC, 3SC with the loops of the Second Arm, 2SC (18)
17 [1SC, 1dec] * 6 (12)
Fill with 2/3 of Fiber.
We change the string and start knitting the Head with Brown Color Thread.

Head

18 [1SC, 1inc] * 6 (18)
19 [2SC, 1inc] * 6 (24)
20 [3SC, 1inc] * 6 (30)
21 – 25 30SC (5 Rows Same) (30)
26 [3SC, 1dec] * 6 (24)
27 [2SC, 1dec] * 6 (18)
28 [1SC, 1dec] * 6 (12)
We fill the fiber.
29 [1dec] * 6 (6)
we end
We place Security Locked Eyes between Rows 21 and 22.
We start knitting with Brown Color Thread.

Ears (2 pieces)

We start knitting with Brown Color Thread.
01 Making 2CH and taking the second ring of the chain with crochet: 6SC in the same ring (6)
02 [1inc] * 6 (12)
03 [1SC, 1inc] * 6 (18)
DO NOT FILL THE FIBER.
We fold the tops together and knit them on both sides with 9SC.
We’re finishing.

Queue

We knit with Brown Color Thread.
01 Making 2CH and taking the second ring of the chain with crochet: 6SC in the same ring (6)
02 [1inc] * 6 (12)
03 [1dec] * 6 (6)
We’re finishing.

Mouth -Nose Place

We knit it with Brown or Light Brown Color Thread.
01 Making 2CH and taking the second ring of the chain with crochet: 8SC in the same ring (8)
02 [1inc] * 8 (16)
03 [1SC, 1inc] * 8 (24)
We’re finishing.

Joining Parts

Place the Mouth-Nose Place in the Head between Rows 17-21 and sew. Fill in some fiber before finishing.
Place the ears on the Head between Rows 22-29 and sew.
Place the tail from the back of the body and sew.
Process the Nose with Black Embroidery thread.
Dress up the Pajamas by sewing the Buttons.

More Amigurumi Plush Bear Ideas: