You will need

Yarn (beige, turquoise).
Pink felt (for the ears).
Safety eyes.
Tulle or gauze, some lace, satin ribbon.
Stuffing (fiberfill).

Abbreviations

inc – increase
dec – decrease
slst – slip stitch
sc – single crochet

Head

This part is crocheted in closed rounds, not in a spiral. This means every round is closed with a slipstitch and the next round is started with a 1 chain. These instructions are not included in the description.
In beige:
Chain 11, start in the second stitch from the hook: 9 sc, 3 sc in the last chain. Continue on the other side of the chain with 8 sc, 2 sc in the last chain (22).
Round 2 – 1 inc, 8 sc, 3 inc, 8 sc, 2 inc (28)
Round 3 – 1 inc, 9 sc, 1 inc, 1 sc, 1 inc, 1 sc, 1 inc, 9 sc, 1 inc, 1 sc, 1 inc, 1 sc (34)
Round 4 – 1 inc, 10 sc, 1 inc, 2 sc, 1 inc, 2 sc, 1 inc, 10 sc, 1 inc, 2 sc, 1 inc, 2 sc (40)
Round 5 – 1 inc, 11 sc, 1 inc, 3 sc, 1 inc, 3 sc, 1 inc, 11 sc, 1 inc, 3 sc, 1 inc, 3 sc (46)
Round 6 – 1 inc, 12 sc, 1 inc, 4 sc, 1 inc, 4 sc, 1 inc, 12 sc, 1 inc, 4 sc, 1 inc, 4 sc (52)
Round 7 – 1 inc, 13 sc, 1 inc, 5 sc, 1 inc, 5 sc, 1 inc, 13 sc, 1 inc, 5 sc, 1 inc, 5 sc (58)
Round 8 – 1 inc, 14 sc, 1 inc, 6 sc, 1 inc, 6 sc, 1 inc, 14 sc, 1 inc, 6 sc, 1 inc, 6 sc (64)
Round 9-15 – 1 sc in each stitch (64)
Round 16 – 1 dec, 14 sc, 1 dec, 6 sc, 1 dec, 6 sc, 1 dec, 14 sc, 1 dec, 6 sc, 1 dec, 6 sc (58)
Round 17 – 1 sc in each stitch (58)
Round 18 – 1 dec, 13 sc, 1 dec, 5 sc, 1 dec, 5 sc, 1 dec, 13 sc, 1 dec, 5 sc, 1 dec, 5 sc (52)
Round 19 – 1 sc in each stitch (52)
Round 20 – 1 dec, 12 sc, 1 dec, 4 sc, 1 dec, 4 sc, 1 dec, 12 sc, 1 dec, 4 sc, 1 dec, 4 sc (46)
Round 21 – 1 dec, 11 sc, 1 dec, 3 sc, 1 dec, 3 sc, 1 dec, 11 sc, 1 dec, 3 sc, 1 dec, 3 sc (40)
Round 22 – 1 dec, 10 sc, 1 dec, 2 sc, 1 dec, 2 sc, 1 dec, 10 sc, 1 dec, 2 sc, 1 dec, 2 sc (34)
Round 23 – 1 dec, 9 sc, 1 dec, 1 sc, 1 dec, 1 sc, 1 dec, 9 sc, 1 dec, 1 sc, 1 dec, 1 sc (28)
Round 24 – 1 dec, 8 sc, 1 dec, 2 sc, 1 dec, 8 sc, 1 dec, 2 sc (24)
Fasten off, leave a yarn tail for sewing.
Place the eyes between rounds 15 and 16, about 9 stitches apart.
Embroider the snout with black embroidery thread.
Color the cheeks with some rouge.

Ears

In beige, make two. Crochet in rounds.
Round 1 – 6 sc in magic ring (6)
Round 2 – Repeat (1 inc, 1 sc) (9)
Round 3 – 1 sc, 1 inc, 2 sc, 1 inc, 2 sc, 1 inc, 1 sc (12)
Round 4 – 2 sc, 1 inc, 3 sc, 1 inc, 3 sc, 1 inc, 1 sc (15)
Round 5 – 3 sc, 1 inc, 4 sc, 1 inc, 4 sc, 1 inc, 1 sc (18)
Round 6 – 2 sc, 1 inc, 5 sc, 1 inc, 5 sc, 1 inc, 3 sc (21)
Round 7 – Repeat (6 sc, 1 inc) (24)
Fasten off, leave yarn tail for sewing.
Cut two triangles from pink felt and glue or sew them to the ears.

Arms

In beige, make two, work in spirals.
Round 1 – Magic ring with 6 dc (6)
Round 2 – 6 inc (12)
Round 3-8 – 1 sc in each point (12)
Round 9-10 – 2 dec, 3 sc, 2 inc, 3 sc (12)
Round 11-26 .- 1 sc in each point (12)
Start stuffing, don’t stuff too much.
Round 27 – 6 dec (6)
Fasten off, leave a yarn tail for sewing.

Legs and Body

Make two.
The legs are made separately and crocheted together. Crochet the legs in closed rounds (not spirals).
Start with turquoise yarn.
Chain 5.
Start in the second loop from the hook:
Round 1 – 1 sc, 2 sc in the next two chains, 3 sc in the last chain.
Turn the piece and continue on the other side: 2 sc, 2 sc in the last chain (10).
Round 2 – 1 inc, 2 sc, 3 inc, 2 sc, 2 inc (16)
Round 3 – 1 inc, 4 sc, 4 inc, 4 sc, 3 inc (24)
Round 4 – 1 sc in each point (24)
Round 5 – 7 sc, 3 dec, 1 sc in every stitch (21)
Switch to beige yarn:
Round 6 – 6 sc, 3 dec, 1 sc in every stitch until the last two stitches, 1 dec (17)
Round 7 – 5 sc, 3 dec, 1 sc in every stitch (14)
Round 8-35 – 1 sc in every stitch (14)
Close each leg with a slipstitch, fasten off and stuff the legs lightly.

Body

In turquoise, work in spirals.
Chain 2. Close one leg with 7 sc (flatten it first), chain 2, flatten the other leg and close it with 7 sc. Chain 2.
You should have a row of 20 stitches.
Crochet sc around in the front and back loops of the previous rows (40), this is round 1.
Round 1 – 40 sc (20 for the front of the row and 20 for the back)
Round 2-7 – 1 sc in every stitch (40)
Round 8 – Repeat (8 sc, 1 dec) (36)
Round 9-11 – 1 sc in every stitch (36)
Round 12 – Repeat (7 sc, 1 dec) (32)
Round 13-15 – 1 sc in every stitch (32)
Round 16 – Repeat (6 sc, 1 dec) (28)
Round 17-19 – 1 sc in every stitch (28)
Round 20 – Repeat (5 sc, 1 dec) (24)
Round 21 – 1 sc in every stitch (24)
Sew the head to the body, stitch for stitch.
Glue the lace necklace to the neck.
Sew the arms to the body. Don’t sew them too tightly in order to maintain some mobility.
Sew or glue the tulle skirt to the body and attach the satin ribbon.
Attach turquoise yarn shoelaces to the shoes and tie them to the legs.

More Amigurumi Cat Ideas

You will need

– Bernat Super Value in Black, Soft Gray, Pumpkin, and White.
– Size H Crochet Hook
– 12mm Color Safety Eyes
– 12mm Animal Safety Nose
– Tapestry Needle
– Poly-fil Fiber Stuffing
– One pipe cleaner for each tail (this is what makes it bendable!).

Abbreviations

Magic Ring Tutorial
SC = Single Crochet
SC Decrease = Single Crochet Decrease

Head

Magic ring, chain 1 and make 10 SC in ring, join to first SC, chain 1 (10 SC)
Round 2: 2 SC in each stitch around, join, chain 1 (20 SC)
Round 3: SC in each stitch around (20 SC)
Round 4: 2 SC in first, SC in next, repeat around, join, chain 1 (30 SC)
Round 5; SC in each stitch around, join, chain 1 (30 SC)
Round 6: 2 SC in first, SC in next 2, repeat around, join, chain 1 (40 SC)
Round 7-13: SC in each stitch around, join, chain 1 (40 SC)
Round 14: SC decrease, SC in next 2, repeat around, join, chain 1
Round 15: SC in each stitch around, fasten off leaving long tail.

Body

(First 6 rounds are same as head)
Magic ring, chain 1 and make 10 SC in ring, join to first SC, chain 1 (10 SC)
Round 2: 2 SC in each stitch around, join, chain 1 (20 SC)
Round 3: SC in each stitch around (20 SC)
Round 4: 2 SC in first, SC in next, repeat around, join, chain 1 (30 SC)
Round 5; SC in each stitch around, join, chain 1 (30 SC)
Round 6: 2 SC in first, SC in next 2, repeat around, join, chain 1 (40 SC)
7-10: SC in each stitch around, join, chain 1 (40 SC)
Round 11: SC decrease, SC in next two, repeat around, join, chain 1
Round 12-13: SC in each stitch around, join, chain 1
Round 14: SC decrease, SC in next, repeat around, join, chain 1
Round 15-25: SC in each stitch around, join, chain 1
Fasten off after round 25 leaving a long tail to sew body onto head.

Ears (make 2)

magic ring, chain and make 4 SC in ring, pull tight and continue to SC in rounds.
Round 2: SC in each stitch around (4 SC)
Round 3: 2 SC in first stitch, SC in next, repeat around (6 SC)
Round 4: SC in each stitch around (6 SC)
Round 5: 2 SC in first stitch, SC in next 2, repeat around (8 SC)
Round 6: SC in each stitch around (8 sc)
Fasten off leaving long tail to sew ears onto head

Tail

Magic ring, chain 1 and make 5 SC in ring, pull tight and continue to SC in rounds making tail as long/short as you like. Mine is about 30 rounds. After about the first 10 rounds you will want to start inserting your pipe cleaner. Fold it in half and twist it and then insert (not all the way to the end though) and crochet around it leaving about 1/2 inch still poking out.

Assembly

Add safety eyes at about 9 rows up from the bottom and then place nose two rows lower and centered between the eyes.
Take long strand of white (or black) yarn and sew on whiskers
Stuff head with polyfil fiber stuffing and sew shut with your tapestry needle using the whip stitch.
Sew on ears to both ends of the head.
Stuff body with polyfil fiber stuffing. The top of the body matches up perfectly with round 3 of the head.
Line them up and stitch together!
Poke the end of the pipe cleaner that is sticking out of the tail into the side/back of the cat body (about 9 rows up from the bottom). Sew onto body!

More Amigurumi Cat Ideas

You will need

DK weight cotton yarn in 3 colors (I chose beige, write and purple).
Crochet hook 2.5 mm
Polyester fiberfill
Safety eyes (Ø 10 mm)
Black cotton thread
Satin ribbon
Tapestry and embroidery needle

Abbreviatons

Slip stitch (sl st)
Chain (ch)
Single crochet (sc)

About the pattern

Work in continuous rounds. Do not join or turn unless otherwise instructed.
Use a stitch marker and place it in the first stitch of the round to mark the beginning of it.
Leave each piece a long tail for sewing.

Head

Crocheted from top to bottom.

1: Color A. Start 6 sc in a magic ring [6]
2: Work 2 sc in each st around [12]
3: (Sc in next st, 2 sc in next st) rep 6 times [18]
4: (Sc in each of next 2 sts, 2 sc in next st) rep 6 times [24]
5: (Sc in each of next 3 sts, 2 sc in next st) rep 6 times [30]
6: (Sc in each of next 4 sts, 2 sc in next st) rep 6 times [36]
7: (Sc in each of next 5 sts, 2 sc in next st) rep 6 times [42]
8-12: Sc in each st around
13: (Sc in each of next 5 sts, sc2tog) rep 6 times [36]
14: (Sc in each of next 4 sts, sc2tog) rep 6 times [30]
Fasten safety eyes between rounds 10 and 11. Insert the first eye, then count 9 holes to the left and insert the second eye in the next hole. Close the washers.
Fill the head with fiberfill and add stuffing as you go.
15: (Sc in each of next 3 sts, sc2tog) rep 6 times [24]
16: (Sc in each of next 2 sts, sc2tog) rep 6 times [18]
17: (Sc in next st, sc2tog) rep 6 times [12]

Ear (make 2)

1: Color A. Start 6 sc in a magic ring [6]
2: (Sc in next st, 2 sc in next st) rep 3 times [9]
3: (Sc in each of next 2 sts, 2 sc in next st) rep 3 times [12]
4: Sc in each st around
5: (Sc in each of next 3 sts, 2 sc in next st) rep 3 times [15]
6: Sc in each st around
Sew the ears to the head.

Muzzle

1: Color B. Start 6 sc in a magic ring [6]
2: Work 2 sc in each st around [12]
Sew the muzzle on the face. Embroider the nose with black thread.

Body

Crocheted from the bottom up.
1: Color A. Start 6 sc in a magic ring [6]
2: Work 2 sc in each st around [12]
3: (Sc in next st, 2 sc in next st) rep 6 times [18]
4: (Sc in next 2 sts, 2 sc in next st) rep 6 times [24]
5: (Sc in next 3 sts, 2 sc in next st) rep 6 times [30]
6-7: Sc in each st around
8: (Sc in next 3 sts, sc2tog) rep 6 times [24]
9: Sc in each st around
10: (Sc in next 6 sts, sc2tog) rep 3 times [21]
11: (Sc in next 5 sts, sc2tog) rep 3 times [18]
Stuff the body and add stuffing as you go.
12: (Sc in next 4 sts, sc2tog) rep 3 times [15]
13: (Sc in next 3 sts, sc2tog) rep 3 times [12]
Sew the head and body together.

Leg (make 2)

1: Color B. Start 6 sc in a magic ring [6]
2: Work 2 sc in each st around [12]
3: Sc in each st around
4-8: Color A. Sc in each st around
Fill the tip of the leg.
9: (Sc in next 2 sts, sc2tog) rep 3 times [9]
Sew the legs to the body in sitting position, so that your kitty can nicely lean on them.

Arm (make 2)

1: Color B. Start 6 sc in a magic ring [6]
2: (Sc in next st, 2 sc in next st) rep 3 times [9]
3: Sc in each st around
4-6: Color A. Sc in each st around
Fill the tip of the arm.
7: Sc in next 7 sts, sc2tog [8]
8: Sc in each st around
9: Sc in next 6 sts, sc2tog [7]
10: Sc in each st around
11: Sc in next 5 sts, sc2tog [6]
12: Sc in each st around
Sew the arms quite to the front, between the head and body.
Attach the arms with a few stitches to the body to keep them in place.

Tail

1: Color B. Start 6 sc in a magic ring [6]
2: Sc in each st around
3: (Sc in next st, 2 sc in next st) rep 3 times [9]
4: Sc in each st around
5: (Sc in next 2 sts, 2 sc in next st) rep 3 times [12]
Here after alternate color every round in the following sequence: color C (purple), color B (white), color A (beige), color B (white).
6-8: Sc in each st around
9: Sc in next 5 sts, sc2tog, sc in next 5 sts [11]
10: Sc in next 9 sts, sc2tog [10]
Stuff the tail and add stuffing as you go.
11: Sc in next 4 sts, sc2tog, sc in next 4 sts [9]
12: Sc in next 7 sts, sc2tog [8]
13: Sc in each st around
14: Sc in next 3 sts, sc2tog, sc in next 3 sts [7]
15-25: Sc in each st around
Sew the tail to the body and attach it with some stitches somewhat higher as well to keep it upright.
Tie a ribbon around the neck and you`re done!

More Amigurumi Little Cat Ideas

You will need

Yarn: sport or DK light weight yarn. (I used Yarnart Jeans)
• Crochet hook: 2mm-2.5mm
• Black embroidery thread
• Fiberfill
• Yarn needles
• Safety eyes size 5mm

Abbreviations

MR – magic ring
SC – single crochet
hdc – half double crochet
inc-increase (2 single crochet in 1 stitch)
dec- decrease invisible decrease)
BLO-back loop only sill

Head

start with white yarn, crochet carefully
Rnd 1. 8sc in MR (8)
Rnd 2. 8-inc (16)
Rnd 3. (sc, inc) *8 (24)
Rnd 4. BLO (2sc, inc) * 8 (32)
Rnd 5. (3sc, inc) *2, (sc, inc) * 7, (in grey) (sc, inc), (3sc, inc) * 2 (44)
Rnd 6. (grey) 10sc, (white) (2sc, inc) * 6, 2sc, (grey) inc, 2sc, inc, 9sc, inc (53)
Rnd 7. (grey) 12sc, (white) 23sc, (grey) 18sc (53)
Rnd 8. (grey) 14sc, (white) 20sc, (grey) 19sc (53)
Rnd 9. (grey) 15sc, (white) 18sc, (grey) 20sc (53)
Rnd 10. (grey) 16sc, (white) 16sc, (grey) 21sc (53)
Rnd 11. (grey) 17sc, (white) 14sc, (grey) 22sc (53)
Rnd 12. (grey) 13sc, dec, 3sc, (white) 5sc, dec, 5sc, (grey) 3sc, dec, 18sc (50)
Rnd 13. (grey) 12sc, dec, 4sc, (white) 3sc, dec, 4sc, (grey) 3sc, dec, 17sc (47)
Insert the safety eyes at round 12, 13. 7sc apart.
Rnd 14. (grey) ilsc, dec, 5sc, (white) Osc, (grey) 5sc, dec, 165C (45)
Rnd 15. (grey) 18sc, (white) 45c, (grey) 23sc (45)
Rnd 16. (grey) 195c, (white) 2sc, (grey) 24sc (45)
Rnd 17. (grey) 195c, (white) 1-dec, (grey) 24sc (44)
Rnd 18-20. (3 rnds) 43sc (43) Rnd 21. (9sc, dec) * 3 (40)
Rnd 22. 40sc (40)
Rnd 23. (3sc, dec) * 8 (32)
Rnd 24. (2sc, dec) * 8 (24)
Rnd 25. (sc, dec) * 8 (16)
Rnd 26. 8-dec (8) cut the yarn and weave in the end

Arm (Make 2)

Rnd l. 6sc in MR (6)
Rnd 2. 6-inc (12)
Rnd 3-5. (3 rnds) 12sc (12) change to yellow
Rnd 6-15. (10 rnds) 12sc (12)
cut the yarn, leave long tail for sewing

Leg (Make 2)

Rnd 1. 6sc in MR (6)
Rnd 2. 6-inc (12)
Rnd 3. 12sc (12)
Rnd 4. (2sc, inc) * 4 (16)
Rnd 5-6. (2 rnds) 165c (16)
Cut the yarn make the 2nd leg in the same way till rnd 6. Don’t cut the yarn. Join in Ist leg. Continue to the body

Body

Rnd 1. (3sc, inc)* 8 (40)
Rnd 2. 10sc, inc, 18sc, inc, 10sc (42)
Rnd 3-9. (8 rnds) 42sc (42)
Rnd 10. (5sc, dec) * 6 (36)
Rnd 11-12. (2 rnds) 36sc (36)
Rnd 13. (4sc, dec) * 6 (30)
Rnd 14-15. (2 rnds) 30sc (30)
Rnd 16. (3sc, dec) * 6 (24)
Rnd 17. BLO 245C (24)
Cut the yarn, leave long tail for sewing

Shirt

Start with yellow. Find BLO round of the body (rnd 17) and start to crochet the shirt.
Rnd 1. (3sc, inc) * 6 (30)
Rnd 2. 30sc (30)
Rnd 3. (4sc, inc) * 6 (36)
Rnd 4-5. (2 rnds) 36sc (36)
Rnd 6. (5sc, inc) * 6 (42)
Rnd 7-15. (9 rnds) 42sc (42) slst.
Cut the yarn and weave in the end

Ears (Make 2)

Rnd 1. 4sc in MR (4)
Rnd 2. 4-inc (8)
Rnd 3. (3sc, inc) * 2 (10)
Rnd 4. (4sc, inc) * 2 (12)
Rnd 5. (5sc, inc) * 2 (14), slst
Cut the yarn, leave long tail for sewing

Hat

Rnd 1. 8sc in MR (8)
Rnd 2. 8-inc (16)
Rnd 3. (sc, inc) * 8 (24)
Rnd 4. (2sc, inc) 8 (32)
Rnd 5. sc, inc, (3sc, inc) * 7, 2sc (40)
Rnd 6. (4-hdc, inc) * 8 (48)
Rnd 7-8. (2 rnds) 48 hdc (48)
Rnd 9. 8 hdc, 8 chains, (skip 8 hdc), 9sc, 8 chains, (skip 8 hdc), 15 hdc. (48)
Rnd 10. 11 hdc, inc, (5 hdc, inc) * 3,18 hdc (52)
Rnd 12. 12 hdc, inc, (6 hdc, inc) * 3,18 hdc (56)
Rnd 13.54 hdc, 2sc, slst. (56)

More Amigurumi Cat Ideas

You will need

red yarn, 38 g
white yarn, 20 g
fuzzy white yarn, 13 g
light grey yarn , 55 g
dark grey yarn , 4 g
2.75 mm crochet hook (with red, dark grey, and light grey yarn), 4 mm crochet hook (with fuzzy white yarn)
Yarn needle (bent tip helpful for attaching amigurumi part)
fiberfill
pink felt (for lining of ears)
9 mm safety eyes
black embroidery floss or thin cotton yarn
glue gun
decorative floral wiring (12 gauge)
Clover lock ring stitch markers
dog slicker brush (optional)

Note

• I worked in continuous rounds (vs. joined rounds) unless otherwise indicated.
• For a cleaner colour change, when working last stitch in old colour: work as if typical single crochet until two stitches are left on the hook (i.e. insert hook into stitch, yarn over, pull up a loop).  Use new colour to yarn over and pull through both loops.  Work slip stitch in next stitch using new colour.  Then continue crocheting single crochets as normal with new colour.

Stocking

We will begin with the toe of the stocking. Using white yarn and 2.75 mm hook,
Round 1: 6 sc in Magic Ring. (6 sts)
R2: Inc around. (12 sts)
R3: Sc 1, Inc, rep 6 times. (18 sts)
R4: Sc 2, Inc, rep 6 times. (24 sts)
R5: Sc 3, Inc, rep 6 times. (30 sts)
R6: Sc 4, Inc, rep 6 times. (36 sts)
R7: Sc 5, Inc, rep 6 times. (42 sts)
R8-15: Sc 42
R16: Sc 6. Switch to red yarn, Sc 36. (42 sts)
R17-18: Sc 42
R19: Sc 20, Inc, rep 2 times. (44 sts)
R20-24: Sc 44
Place stitch marker in last stitch of round (1st stitch marker- green in pic below). DO NOT CUT RED YARN (we will continue working with this after the heel is complete). Count 17 stitches clockwise and place stitch marker (2nd stitch marker- peach in pic). This 2nd marker is where we will begin working in turned rounds to make the heel!

We will be working back and forth in turned rows for this part.
Using white yarn, join in stitch where second stitch marker (peach) is located,
Row 1: Sc 22.
Rows 2-7: Chain 1, turn. Starting from second chain from hook, Sc 22.
Chain 10, slip stitch to first single crochet of Row 7.

Now we will begin working in continuous unjoined rounds to form the back heel of the stocking:
Round 1: Single crochet around heel, then back loops of Chain 10 (i.e. Sc 21, Sc 10 in back loops only, Sc 1) (32 sts)
R2: Sc 2, Dec, rep 8 times. (24 sts)
R3: Sc 1, Dec, rep 8 times. (16 sts)
R4: Dec, rep 8 times. (8 sts)
R5: Dec, rep 4 times. (4 sts)
Fasten off.

Now, we will begin the upper body of the stocking! Work in continuous unjoined rounds.
Starting in the stitch where you placed the 1st stitch marker (green) and where working red yarn is located.
Round 1: Sc 44 (my numbers were: Sc 16 for the red part, Sc 22 for the white part [using resultant front loops], Sc 6 for the red part).

R2-22: Sc 44 (44 sts)
Fasten off.
Fuzzy rim of stocking:
Using fuzzy white yarn and 4 mm hook,
Chain 31, slip stitch to first chain to join.
Round 1: Chain 1 (counts as 1 sc), Sc 30, sl st to join. (31 sts)
R2-6: Repeat R1.
Fasten off, leave long end for sewing. When working with fuzzy yarn, the “wrong” side is fuzzier. Thus, ensure that the wrong side is facing outwards.

Sew fuzzy rim to top of stocking so that first round of fuzzy rim overlaps with last round of red stocking.
Optional: Use dog slicker brush to brush the yarn to make it even fuzzier.
Stuff stocking with fiberfill to help it keep its rounded shape.

CAT

Head

Using light grey yarn and 2.75 mm hook,
Chain 7 (this is the foundation chain).
Round 1: Starting from second chain from hook, Sc 6 in back loops of foundation chain. Turn and Sc 6 in front loops of the foundation chain [we are making an oval by crocheting around the chain]. (12 sts)
R2: Inc, Sc 4, Inc x 2, Sc 4, Inc. (16 sts)
R3: Inc x 2, Sc 5, Inc x 3, Sc 5, Inc. (22 sts)
R4: Inc x 3, Sc 7, Inc x 3, Sc 9. (28 sts)
R5: Sc 1, Inc x 3, Sc 11, Inc x 3, Sc 10. (34 sts)
R6: Sc 2, Sc 4, Inc, rep 6 times, Sc 2. (40 sts)
R7-16: Sc 40
R17: Sc 3, dec, rep 8 times. (32 sts)
Insert 9 mm safety eyes between rounds 13 and 14, 8 stitches apart. Embroider nose and whiskers using black embroidery floss or thin cotton yarn. Embroider nose between rounds 13 and 14. Embroider 2 whiskers on each side between Rounds 13/14 and 14/15 Begin stuffing head.
R18: Sc 2, dec, rep 8 times. (24 sts)
R19: Sc 2, dec, rep 6 times. (18 sts).
R20: Sc 1, dec, rep 6 times. (12 sts)
Continue stuffing.
R21: Dec, rep 6 times. (6 sts)
Fasten off.

Stripes (Make 3)

Using dark grey yarn and 2.75 mm hook,
Chain 18. Fasten off and leave long end for sewing. Each stripe measured 3.15″/8 cm . Sew stripes on top of cat’s head using tapestry needle. We placed them so that the fronts of the stripes are located between Rounds 8 and 9.

Ears (Make 2)

Using light grey yarn and 2.75 mm hook,
Round 1: 4 sc in Magic Ring.
R2: Inc, rep 4 times. (8 sts)
R3: Sc 1, Inc, rep 4 times. (12 sts)
R4: Sc 3, Inc, rep 3 times. (15 sts)
R5: Sc 4, Inc, rep 3 times. (18 sts)
R6: Sc 5, Inc, rep 3 times. (21 sts)
Fasten off and leave long end for sewing. Cut triangles out of pink felt and hot glue onto ears as lining. Sew ears onto head of cat.

Arms (Make 2)

Using dark grey yarn and 2.75 mm hook,
Round 1: 5 sc in Magic Ring. (5 sts)
R2: Inc, rep 5 times. (10 sts)
Optional: Embroider three black lines onto paws to form claws after Round 3.
R3-5: Sc 10 (10 sts).
Switch to light grey yarn,
R6-14: Sc 10 (10 sts)
Fasten off and leave long end for sewing. Cut decorative floral wiring and bend tip. Insert into arm so that bent tip is at paw. Gently stuff.

Attach onto bottom of cat’s head as pictured below.

Shape arms into S curve.

Tail

Using dark grey yarn and 2.75 mm hook,
Round 1: 4 sc in Magic Ring (4 sts).
R2: Inc, rep 4 times (8 sts).
R3-7: Sc 8 (8 sts).
Stuff lightly as you go.
Switch to light grey yarn,
R8-47: Sc 8 (8 sts)
My finished tail measured 10.5″/26.7 cm. Keep adding rounds to desired length.

Assembly

Fasten off and leave long end for sewing. Cut decorative floral wire and insert into tail.
Attach 1.25″/3 cm of tail to inside of stocking using fuzzy white yarn (so that seam is not visible from outside of stocking).
Carefully position cat’s head onto tail and attach 1.5″/3.8 cm together using grey yarn.
Check to make sure that the cat’s head and arms will cover the opening of the stocking at resting position.
Cat’s head should be able to pivot up and down so that items can be placed in the stocking.

You will need

3.00mm crochet hook
White yarn
Light brown yarn
Black yarn
Black thread
Polyester filling

Abbreviations

dec = decrease
inc = increase
mr = magic ring
sc = single crochet
ch=chain

Head

R1. (in White) MR 6 (6)
R2. [ inc ]x 6 (12)
R3. [ inc, sc ]x 6 (18)
R4. sc, [ inc, sc 2 ]x 5, inc, sc (24)
R5. [ inc, sc 3 ]x 6 (30)
R6. sc 2, [ inc, sc 4 ]x 5, inc, sc 2 (36)
R7-R10. sc 36 (36)
R11. [ inc, sc 5 ]x 6 (42)
R12-R13. sc 42 (42)
R14. [ dec, sc 5 ]x 6 (36)
R15. sc 2, [ dec, sc 4 ]x 5, dec, sc 2 (30)
R16. [ dec, sc 3 ]x 6 (24)
Finish off, leaving a tail for attaching later.

Body

R1. (in White) MR 6 (6)
R2. [ inc ]x 6 (12)
R3. [ inc, sc ]x 6 (18)
R4. sc, [ inc, sc 2 ]x 5, inc, sc (24)
R5. [ inc, sc 3 ]x 6 (30)
R6-R8. sc 30 (30)
R9. [ dec, sc 3 ]x 6 (24)
R10-R12. sc 24 (24)
Finish off.

Leg (Make 2)

R1. (in Brown) MR 6 (6)
R2. [ inc, sc ]x 3 (9)
R3-R4. sc 9 (9)
R5-R6. (in White) sc 9 (9)
Finish off, leaving a tail for attaching later.

Arm (Make 2)

R1. (in Brown) MR 6 (6)
R2. [ inc, sc 2 ]x 2 (8)
R3. sc 8 (8)
R4. (in White) sc 8 (8)
R5. dec, sc 6 (7)
Finish off, leaving a tail for attaching later.

Tail

R1. (in Brown) MR 5 (5)
R2-R3. sc 5 (5)
R4-R6. (in White) sc 5 (5)
Finish off, leaving a tail for attaching later.

Ears (Make 2)

R1. (in Brown) MR 6 (6)
R2. sc (6)
R3. [ inc, sc ]x 3 (9)
Finish off, leaving a tail for attaching later.

Collar

R1. (in Pink) sc 24
R2. ch 1, turn, (starting in second chain from hook) sc 2, hdc 20, sc 2 (24)
Finish off, leaving a tail for attaching later.

Bell

R1. (in Yellow/Gold) MR 5 (5)
R2. [ inc ]x 5 (10)
R3-R4. sc 10 (10)
R5. [ dec ]x 5 (5)
Finish off, leaving a tail for attaching later.

Assembly

Stuff the head, body and legs. The arms, ears and tail are too small and don’t need any stuffing to maintain their shape. I like to pin all of the pieces in place to make sure they look good before using the tails to attach them.

I usually attach the legs, then tail, then arms, before embroidering the face on and attaching the head. Take a length of black yarn and embroider the eyes and nose. The top of the eyes come out of row 10 and go back into row 12. The nose is on row 12 as well. There are about 4 stitches between the nose and the eyes on either side.

Then take a length of thinner black thread and embroider the mouth in a small upside “V” from the centre of the nose. Last thing left for the face is to take a length of the light brown yarn and embroider on the eyebrows.

Once the face is done, attach the head and then the ears. I like to attach the head before the ears because it’s easier to find the right placement for the ears. They always end up wonky if I do it first.

Then all that’s left to do is attach the collar and bell. Use the tails of the collar to attach it, the ends will be at the front and will get covered up by the bell.

More Amigurumi PuppyCat Ideas

You will need

Yarn (for crochet hooks 3 – 3.5 mm/ 2mm wide)
Colors: Light Pink – Lilac – Green – Orange – Black
Yarn (to embroider cat’s mustache)
Color: White
Felt
Colors: White – Light Pink – Yellow – Deep Pink – Black
Fiberfill (to stuff)
Textile Glue (for glue some parts of felt)
Jingle Bells (6mm diameter)
2mm Crochet Hook
2,5mm Crochet Hook
3,5mm Crochet Hook
Yarn Needle (for sew amigurumi parts)
Scissors – Pencil – Ruler

Abbreviations

ch = chain stitch
dec = decrease
FO = fasten off
inc = increase
mm = millimeter(s)
mr = magic ring
sc = single crochet
sl st = slip stitch
st = stitch
rep = repeat
rnd(s)= round(s) * * x…= repeat instructions in asterisks … times
Continuous round = Crochet all followed, without closing the rounds.
Joined round = Go closing every rounds and climb to the next turn with a chain.
Worked in Rows = Crochet in a base of chains and turning the crochet at the end each row.

Head

Worked in continuous round with black color and 3,5mm hook.
Round 1.- Magic Ring (6)
Round 2.- 6 inc. (12)
Round 3.- 1sc, 1inc x6 (18)
Round 4.- 2sc, 1inc x6 (24)
Round 5.- 3sc, 1inc x6 (30)
Round 6.- 4sc, 1inc x6 (36)
Rounds 7 – 11.- 1sc in each st (36)
Round 12.- 4sc, 1dec x6 (30)
Round 13.- 3sc, 1dec x6 (24)
Round 14.- 2sc, 1dec x6 (18)
Round 15.- 1sc, 1dec x6 (12)
Round 16.- 6 dec. (6)
Stuff the head as you crochet. FO, leaving a long tail.

Body

Worked in continuous round with black color and 3,5mm hook.
Round 1.- Magic Ring (6)
Round 2.- 6 inc. (12)
Round 3.- 1sc, 1inc x6 (18)
Round 4.- 2sc, 1inc x6 (24)
Rounds 5 – 11.- 1sc in each st (24)
Round 12.- 2sc, 1dec x6 (18)
Rounds 13 – 18.- 1sc in each st (18)
Round 19.- 1sc, 1dec x6 (12)
Rounds 20 – 23.- 1sc in each st (12)
Stuff the body as you crochet. FO, leaving a long tail.

Back Legs (Make 2)

Worked in joined round with black color and 3,5mm hook.
Round 1.- Magic Ring (6)
Round 2.- 6 inc. (12)
Rounds 3 – 7.- 1sc in each st (12)
Round 8.- 6 dec. (6)
Rounds 9 – 10.- 1sc in each st (6)
Round 11.- 6 inc. (12)
Rounds 12 – 13.- 1sc in each st (12)
Round 14.- 6 dec. (6)
Round 15.- 3 dec. (3)
Stuff the piece as you crochet. Fasten off, leaving a long tail. Don’t fill the thin side (that is, the ankle). In order to shape them into paws, starting at the bottom of the feet, bring the long yarn tail with the needle and go through to the other side of the foot (the top), turning the needle while inside and bringing the needle towards the same point where you started (the bottom) and continue to go through (adjusting as you go) and repeat the same procedure from the other side of the foot. Once both sides have been completed, go from the bottom of the paw all the way to the other side of the thigh. Turn it a little in order to fold the foot/paw. Don’t fasten off yet!

Front Legs (Make 2)

Worked in joined round with black color and 3,5mm hook.
Round 1.- Magic Ring (6)
Rounds 2 – 6.- 1sc in each st (6)
Round 7.- 1sc, 1inc x3 (9)
Rounds 8 – 13.- 1sc in each st (9)
Round 14.- 1sc, 1dec x3 (6)
Rounds 15 – 16.- 1sc in each st (6)
Round 17.- 6 inc. (12)
Round 18 – 19.- 1sc in each st (12)
Round 20.- 6 dec. (6)
Round 21.- 3 dec. (3)
Stuff the piece as you crochet. Fasten off, leaving a long tail. In order to shape them into paws, starting at the bottom of the feet, bring the long yarn tail with the needle and go through to the other side of the foot (the top), turning the needle while inside and bringing the needle towards the same point where you started (the bottom) and continue to go through (adjusting as you go) and repeat the same procedure from the other side of the foot. Once both sides have been completed, go from the bottom of the paw all the way back to the very top of the foot/paw. Turn it a little in order to fold the paw. Don’t fasten off yet!

Ears (Make 2)

Worked in joined round with black color and 2,5mm hook.
Round 1.- Magic Ring (3)
Round 2.- 3 inc. (6)
Round 3.- 1sc, 1inc x3 (9)
Round 4.- 2sc, 1inc x3 (12)
Round 5.- 1sc in each st (12)
Don’t stuff. FO, leaving a long tail.

Tail

Worked in joined round with black color and 3,5mm hook.
Round 1.- Magic Ring (6)
Round 2.- 1sc, 1inc x3 (9)
Rounds 3 – 7.- 1sc in each st (9)
Round 8.- 1sc, 1dec x3 (6)
Rounds 9 – 24.- 1sc in each st (6)
Stuff the tail as you crochet. FO, leaving a long tail.

Overflow

Worked in row with light pink color and 2mm hook.
Start with 20ch + 1ch to climb (21)
Row 1.- 1sc in each st (20)
Fasten off, leaving a long tail. Sew the bell on to sc #10 (in the middle of the overflow). Don’t sew the ends together yet!

Felt Parts

Hat

Worked in continuous round with lilac color and 3,5mm hook.
Round 1.- Magic Ring (3)
Round 2.- 3 inc. (6)
Rounds 3 – 6.- 1sc in each st (6)
Round 7.- 1sc, 1inc x3 (9)
Rounds 8 – 10.- 1sc in each st (9)
Round 11.- 2sc, 1inc x3 (12)
Rounds 12 – 13.- 1sc in each st (12)
Round 14.- 1sc, 1inc x6 (18)
Round 15.- 1sc in each st (18)
Round 16.- 2sc, 1inc x6 (24)
Round 17.- 3sc, 1inc x6 (30)
Round 18.- 3sc, 1dec x6 (24)
Round 19.- 2sc, 1dec x6 (18)
Round 20.- 2sc, 1inc x6 (24)
Round 21.- 3sc, 1inc x6 (30)
Round 22.- 30 inc. (60)
Round 23.- 1sc in each st (60)
Don’t stuff. FO. Place the band around the hat and put the buckle centered with the tallest part facing vertically . Form the hat to your preference!

Pumpkin

BODY -Worked in joined round with orange color and 3,5mm hook.
Round 1.- Magic Ring (6)
Round 2.- 6 inc. (12)
Round 3.- 1sc, 1inc x6 (18)
Round 4.- 2sc, 1inc x6 (24)
Round 5.- 3sc, 1inc x6 (30)
Rounds 6 – 12.- 1sc in each st (30)
Round 13.- 3sc, 1dec x6 (24)
Round 14.- 2sc, 1dec x6 (18)
Round 15.- 1sc, 1dec x6 (12)
Round 16.- 6 dec. (6)
STEM – Worked in joined round with green color and 2mm hook.
Round 1.- Magic Ring (6)
Rounds 2 -5.- 1sc in each st (6)
Round 6.- 6 inc. (12)
The body of the pumpkin: Continue stuffing as you go along and push the stuffing towards the sides, leaving the center a bit more empty so that you can push it in a little at the top. Fasten off, leaving a pretty long tail. With this same tail we’re going to create the segments. With the yarn, go through the center and pierce through the base, turning towards the bottom so that a small cavity is formed in the center of the pumpkin (where we’re later going to put the stem). Pull the tail out and then put it through the center at the top, going through the base and repeat this in the same place once more (tighten the two stitches well to make sure that they accommodate both the stuffing and the segments. Repeat this 6 times, dividing the pumpkin into 6 segments. FO. The stem: Don’t stuff. FO, leaving a long tail, and use that tail to sew it into the space at the top of the pumpkin. FO.

Assemble Kitten

1.- Sew the ears to the head between rows 3 and 7 (counting from the top).
2.- Assemble the eyes, gluing the pieces together and then glue them to the head between rows 10 and 12 (counting from the top) and leaving 4sc. of distance between them.
3.- Glue the nose to the head at row 12 (counting from the top) and centering them in relation to the eyes.
4.- Glue the cheeks to the head between rows 11 and 12 (counting from the top), one to each side of the attached eyes.
5.- Glue the interior triangles to the attached ears .
6.- Embroider the whiskers with white thread to the head between rows 9 and 11 (counting from the top) to sides of both eyes.
7.- Sew the back legs to the body between rows 5 and 10 (counting from the bottom). Sew, following the thigh to the side (don’t sew the feet, leave them loose and fold them a bit to form the leg like shape).
8.- Sew the front legs to the body between rows 5 and 18 (counting from the top), one next to the other (don’t sew the feet, leave them loose and fold them a bit to form them into legs).
9.- Sew the tail to the body between rows 5 and 6 (counting from the bottom) and centering it in relation to the back legs.
10.- Sew the head to the body, centered.
11.- Place the collar on the neck with the jingle bell towards the front and sew the ends together in the back.
12.- Finally, place the hat on top, and if you’d like it there permanently, sew it there!
NOTE : If you don’t want to glue the pieces of felt, you can sew them as an alternative!

More Amigurumi Halloween Ideas

You will need

1 piece White color rope
1 piece Red color rope
1 piece Brown color rope
Brown embroidery thread
2.2 mm or 2.5 mm crochet
Bead fiber
8 mm amigurumi eye
Etamine needle
Scissors
Loop-setting

Abbreviations

Sc: Single crochet
inc: Increase
dec: Decrease
Ch: Chain

Things to Watch Out For

• Remember to fill the toy with fiber as you duck.
• If you leave the threads of the parts long, it will be easy for you to sew.
• The numbers before the abbreviations indicate how many times you will repeat the given action.
• Numbers outside of parentheses indicate how many times you will repeat the operation in parentheses.
• The rows of the pieces of the toy are knitted in a spiral without joining them. So every row is like a continuation of each other. For this reason, it is useful to use a looper to determine the headers.

Arms (2 pieces)

It is knitted with brown rope.
1) 5SC into magic ring (5)
2) 5INC (10)
3-25) 10SC (10)
We fill the fiber and fold it in half and cover it with 5SC.

Legs (2 pieces)

It is knitted with brown rope.
1) 6SC into magic ring (6)
2) 6INC (12)
3-27) 12SC (12)
After finishing the first leg, we cut the rope. We will continue the trunk by pulling 4 chains without cutting the rope of the second leg and connecting the two legs with a loop shift.

Body

To continue from the legs;
1) First leg 12SC, 4SC over 4CH, second leg 12SC, 4SC over 4CH(32)
2-15) 32SC (32)
16) 7SC, 1DEC, 14SC, 1DEC, 7SC (30)
17) 7SC, 1DEC, 13SC, 1DEC, 6SC (28)
18) 7SC, 1DEC, 12SC, 1DEC, 5SC (26)
19) 6SC, 1DEC, 11SC, 1DEC, 5SC (24)
20) 6SC, 1DEC, 10SC, 1DEC, 4SC (22)
21) 5SC, 1DEC, 9SC, 1DEC, 4SC (20)
22) 5SC, 1DEC, 8SC, 1DEC, 3SC (18)
23) 4SC, 1DEC, 7SC, 1DEC, 3SC (16)
24) 16SC

Head

To continue from the body;
1) 16SC (16)
2) (1SC, 1INC) * 8 (24)
3) 1SC, 1INC, (2SC, 1INC) * 7, 1SC (32)
4) (3SC, 1INC) * 8 (40)
5) 2SC, 1INC, (4SC, 1INC) * 7, 2SC (48)
6-19) 48SC (48)
We place locked eyes between the 10th and 11th rows, with 10SC between them.
20) 2SC, 1DEC, (4SC, 1DEC) * 7, 2SC (40)
21) (3SC, 1DEC) * 8 (32)
22) 1SC, 1DEC, (2SC, 1DEC) * 7, 1SC (24)
23) (1SC, 1DEC) * 8 (16)
24) 8DEC
We close the remaining opening with the help of an etamine needle and hide the rope.

Ears (2 pieces)

It is knitted with brown rope.
1) 6SC into magic ring (6)
2) (2SC, 1INC) * 2 (8)
3) (3SC, 1INC) * 2 (10)
4) (4SC, 1INC) * 2 (12)
5) (5SC, 1INC) * 2 (14)
6) (6SC, 1INC) * 2 (16)
7) (7SC, 1INC) * 2 (18)
8) (8SC, 1INC) * 2 (20)
9) 20SC
After knitting the ears, we sew them on the head with the help of an etamine needle, as in the image.
Then, again with the help of an etamine needle (preferably with a thinner brown thread) we process the cat’s nose and whiskers as in the image.

Striped T-Shirt

It is knitted with red and white thread by changing one color in both rows.

Body

1) 3CH, 22SC from the 2nd chain.
2) 2SC, 7CH, (5 stitches and 6th stitches ) respectively 8SC, 7CH (5 stitches and 6th stitches) 2SC
3) 1SC to each loop
4) Knitting 7SC, 1INC, 4SC, 1INC, 4SC, 1INC, 7SC, 1INC respectively, 30SC in total
5) 1SC to each loop for 3 rows
6) 34SC in total by knitting 7SC, INC, 6SC, INC, 6SC, INC, 7SC, INC respectively.
7) 1SC to each loop
8) Knitting 8SC, INC, 7SC, INC, 7SC, INC, 8SC, INC respectively 38SC in total
9) 3SC to each loop for 3 rows

Arm

The arms will be knitted on 5 chains and 7 SC that you knit in the 3rd row of the body. Start anywhere with the color you started knitting (I chose to start under the armpit.)
1) In the first row, when you pass 1SC to the upper part of the arm, increase 1 in the SC in the middle of 5 SC.
2) Knit 2 more rows and increase each in the same place.
3) When you reach 15 needles, you will knit 1SC of each loop for 2 rows and knit the arm part in 5 rows in total.
After we put the sweatshirt on the toy, we sew the opening in the back.

Shorts

It is knitted with red color thread.
1) Create a ring by pulling 16CH together.
2) 16SC to each row (rotating) along 7 rows
In this way, another leg is knitted.
3) After knitting two of the leg part, pull 2 ​​chains and join them to the other leg without cutting the rope of the second leg.
4) 16SC from the first leg, 2SC over 2CH, 16SC from the second leg, 2SC over 2CH
5) 36SC across 8 rows
Your dressed cat toy is ready!

More Amigurumi Dressed Cat Ideas:

You will need:

Hand Knitting Threads;
Pink color thread
Baby Yellow color thread
3 mm crochet
14 mm Loren transparent color screw amigurumi eye
Bead fiber
Black color string for eyelashes

Abbreviations

Sh: Magic ring
Sc: Single crochet
inc: Increase
dec: Decrease
Blo: Back knitting

Head

We start with the pink color rope.
1) Sh 6sc
2) (1ınc)6 (12sc) 3) (1sc, 1ınc)6 (18sc)
4) (2sc, 1ınc)6 (24sc) 5) (3sc, 1ınc)6 (30sc)
6) (4sc, 1ınc)6 (36sc) 7) (5sc, 1ınc)6 (42sc)
8) 42sc
9) (6sc, 1ınc)6 (48sc) 10) (7sc, 1ınc)6 (54sc)
11) (8sc, 1ınc)6 (60sc) 12) 60sc 13) (9sc, 1ınc)6 (66sc)
14) (10sc, 1ınc)6 (72sc) 15-20) 72sc 17-18. We wear the eyes with 12sc in between. 21) (10sc, 1dec)6 (66sc)
22) (9sc, 1dec)6 (60sc) 23) (8sc, 1dec)6 (54sc)
24) (7sc, 1dec)6 (48sc) 25) (6sc, 1dec)6 (42sc)
26) (5sc, 1dec)6 (36sc) 27) (4sc, 1dec)6 (30sc)
27) (3sc, 1dec)*6 (24sc)
We fill it well with fiber.

Ears (2 Pieces)

We start with the pink color rope.
1) Sh 6sc
2) (1sc, 1inc)3 (9sc) 3) (2sc, 1inc)3 (12sc)
4) (3sc, 1inc)3 (15sc) 5) (4sc, 1inc)3 (18sc)
6) (5sc, 1inc)3 (21sc) 7) (6sc, 1inc)3 (24sc)
8) 24sc
Let’s cut the rope long.

Inner Ear
We knit baby yellow with color thread.
1) Sh 6sc
2) 6sc
3) 6hdc

Nose

We knit baby yellow with color thread.
1) Sh 6sc
2) (1inc)6 (12sc) 3) 3inc, 3sc, 3inc, 3sc (18sc) 4-5) 18sc 6) (2sc, 1inc)6 (24sc)
Let’s cut the rope long.

Body

We knit with pink color rope.
1) Sh 6sc
2) (1inc)6 (12sc) 3) (1sc, 1inc)6 (18sc)
4) (2sc, 1inc)6 (24sc) 5) (3sc, 1inc)6 (30sc)
6) (4sc, 1inc)6 (36sc) 7) (5sc, 1inc)6 (42sc)
8) (6sc, 1inc)6 (48sc) 9) (7sc, 1inc)6 (54sc)
10) (8sc, 1inc)6 (60sc) 11-20) 60sc 21) (8sc, 1dec)6 (54sc)
22-23) 54sc
24) (7sc, 1dec)6 (48sc) 25-26) 48sc 27) (6sc, 1dec)6 (42sc)
28-29) 42sc
30) (5sc, 1dec)6 (36sc) 31-32) 36sc 33) (4sc, 1dec)6 (30sc)
34-35) 30sc
36) (3sc, 1dec)*6 (24sc)
37-38) 24sc
We fill it well with fiber. We combine the body with the head.

Rear Legs (2 Pieces)

We knit baby yellow with color thread.
1) Sh 6sc
2) (1inc)6 (12sc) 3) (1sc, 1inc)6 (18sc)
4) (2sc, 1inc)6 (24sc) 5) (3sc, 1inc)6 (30sc)
6) (4sc, 1inc)6 (36sc) 7-10) 36sc 11) (10sc, 1dec)3 (33sc)
12) 33sc
13) 11sc, 6dec,10sc (27sc)
14) 11sc, 3dec, 10sc (24sc)
15-17) 24sc
18) (6sc, 1dec)3 (21sc) We knit with pink color rope. 19-20) 21sc 21) (5sc, 1dec)3 (18sc)
22-23) 18sc
24) (4sc, 1dec)*3 (15sc)
25-28) 15sc
We double it and close it with 7sc

Front Legs (2 Pieces)

We knit baby yellow with color thread.
1) Sh 6sc
2) (1ınc)6 (12sc) 3) (1sc, 1ınc)6 (18sc)
4) (2sc, 1ınc)*6 (24sc)
5-9) 24sc
10) 9sc, 3dec, 9sc (21sc)
14) 8sc, 3dec, 7sc (18sc)
12-15) 18sc
We knit with pink color rope.
16-17) 18sc
18) 1dec, 16sc (17sc)
19-21) 17sc
22) 1dec, 15sc (16sc)
23-24) 16sc
25) 1dec, 14sc (15sc)
26-27) 15sc
28) 1dec, 13sc (14sc)
29-37) 14sc
We double it and close it with 7sc..

Queue

We knit with pink color rope.
1) Sh 6sc
2) (1ınc)6 (12sc) 3) (1sc, 1ınc)6 (18sc)
4) (2sc, 1ınc)6 (24sc) 5-8) 24sc 9) (6sc, 1dec)3 (21sc)
We knit baby yellow with color thredecd.
10-12) 21sc
13) (5sc, 1dec)3 (18sc) 14-18) 18sc 19) (4sc, 1dec)3 (15sc)
20-30) 15sc
31) 1dec, 13sc (14sc)
32-36) 14sc
37) 1dec, 12sc (13sc)
38-44) 14sc
We knit with pink color rope.
45-52) 14sc

END 🙂

More Amigurumi Cat Ideas: